Phase IV · Research Methodology · Week 8
Water Resources and Hydraulic Methodology
Plan hydrologic and hydraulic analysis from design storm through conveyance, storage and water quality.
Preliminary work only. Calculations, models and estimates produced here are student coursework for proposal development. They are not sealed engineering documents and do not replace professional engineering judgment.
Water Resources and Hydraulic Methodology
Plan hydrologic and hydraulic analysis from design storm through conveyance, storage and water quality.
Learn
Learning objectives
- Select a design storm and method
- Plan hydrologic and hydraulic modeling
- Define capacity and freeboard criteria
Engineering guidance
Name your design storm, its return period and its source before any hydraulic result appears.
FE Civil connection
Water Resources
Handbook §10 — Hydrology and hydraulics (placeholder)
- What return period governs a culvert crossing?
- How is time of concentration estimated?
- What controls the capacity of a storm sewer?
Technical methodology planner
Plan Chapter 3 against the exact equations, standards, data sources and design checks you will execute in Capstone II.
Write
Water resources methodology workflow
Sixteen steps from drainage-area definition through preliminary drawings and cost — work through them in order.
16-step water resources workflow
0/18 completeAdvisor status
Automatic methodology warnings (4)
- No project path selected — choose a project type on the Project Type tab.
- Design storm and return period not yet recorded.
- Pipe capacity (16.04 cfs) is less than computed peak discharge (32.76 cfs) — increase pipe size or slope.
- Freeboard requirement not yet stated.
Recommended next step
Plan experimental or field work
If your project needs lab testing or a site visit, move to the Experimental Design or Field Investigation studio next.
ContinueLearning objectives
- Select a design storm and method
- Plan hydrologic and hydraulic modeling
- Define capacity and freeboard criteria
Engineering guidance
Name your design storm, its return period and its source before any hydraulic result appears.
FE Civil connection
Water Resources
Handbook §10 — Hydrology and hydraulics (placeholder)
- What return period governs a culvert crossing?
- How is time of concentration estimated?
- What controls the capacity of a storm sewer?
Technical methodology planner
Plan Chapter 3 against the exact equations, standards, data sources and design checks you will execute in Capstone II.